Presse de montage sous vide SXQ-ZK1
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. SXQ-ZK1 vacuum mounting press has a compact design, large capacity, simple and fast Fonctionnement, and high reliability. The built-in vacuum pump can quickly and effectively evacuate, suitable for vacuum cold mounting of epoxy resin. It can effectively remove bubbles in the sample and resin, allowing the resin to penetrate into the pores and cracks of the sample, obtaining a sample without bubbles and pores, and improving the final mounting effect of the sample. It is very suitable for porous materials, such as the preparation of failure analysis specimens for cracks, porous castings, and composite materials, and electronic components, rock minerals, ceramics, etc.
Détails du produit
FCaractéristiques :
Built in low-noise vacuum pump, fast vacuuming speed, high Degré de vide.
Grande chambre à vide entièrement transparente, capable d’accueillir jusqu’à 12 échantillons (40 mm).
Table rotative électrique, coulée manuelle à boutons, pratique et rapide.
Program control, capable of setting Degré de vide, number of cycles and corresponding time, automatically completing the entire mounting process of multiple samples vacuuming, maintaining vacuum, and venting cycles.
Selon différents matériaux et échantillons, 80 ensembles de paramètres de procédé peuvent être sauvegardés et appelés.
Paramètres techniques :
|
Modèle |
SXQ-ZK1 |
|
Degré de vide |
0~-75kPa, vacuum pump 0~-90kPa |
|
Degré de vide par défaut |
-70 kPa |
|
Écoulement sous vide |
10~20L/min |
|
Dimensions de la chambre à vide |
Φ250mm×85mm, accommodating up to 12 samples (Ф40mm) |
|
Contrôle du disque de travail |
Rotation de bouton, rotation horaire et antihoraire |
|
Fonctionnement |
Écran tactile de 7 pouces, coulement manuel à bouton |
|
Cycle de chronométrage |
0~99min, aspiration/ventilation automatique, circulation automatique |
|
nombre maximal de cycles |
99 |
|
Programme |
80 groupes |
|
Alimentation électrique |
220V, 50Hz,10A |
|
Dimensions |
462×400×310mm |
|
Poids net |
24kg |
Liste de choses à faire :
|
Non. |
Nom |
Quantité |
|
Non. |
Nom |
Quantité |
|
1 |
Corps de machine |
1 |
|
6 |
Gobelet en papier jetable |
5 |
|
2 |
Grosse plaque coussin |
1 |
|
7 |
Tige d’agitation |
5 |
|
3 |
Moule à montage à froid 25/30/40mm |
5 |
|
8 |
Papier huilé |
5 |
|
4 |
Ensemble époxy à froid résine 500 ML + liquide 250 ml |
1 |
|
9 |
Manuel d’instructions d’utilisation |
1 |
|
5 |
Connecteur jetable de coulée |
5 |
|
|
|

Obtenez un devis ou plus d’informations
Our technical experts are ready to help you configure the perfect testing solution for your specific requirements. Fill out the form and we'll get back to you within 2 hours.